Votre leader canadien en instrumentation depuis 1946.

Conditionneur de signal pour mesure de position

The signal conditioner supplies position sensors with a highly stable constant voltage. The wiper signal is picked off without load via a high-resistance input stage and transformed into a displacement or rotationally proportional standardized output signal. The excellent linearity, low temperature drift and sensor proximity of the signal conditioning process ensure full utilization of […]

Posez une question sur ce produit

The signal conditioner supplies position sensors with a highly stable constant voltage. The wiper signal is picked off without load via a high-resistance input stage and transformed into a displacement or rotationally proportional standardized output signal.



The excellent linearity, low temperature drift and sensor proximity of the signal conditioning process ensure full utilization of the outstanding benefits of the connected position sensor guaranteeing reliable, interference free signal transmission even over long distances.



The zero point and range can be adjusted independently of each other within wide limits using spindle trimmers. This facility permits standardized output signals to be adjusted even if the maximum stroke or angle of the sensor is not completely utilized. The electronic circuitry is enclosed in an aluminum die-cast housing conforming to protection class IP 66. A UNI-sealed threaded joint ensures the correct EMC coupling of the cable shield. The wide operating voltage range allows the unit to be supplied with an unstabilized direct voltage source. Selected SMD compo-nents with a wide temperature range guarantee maximum operating reliability even under extreme environmental conditions.



The MUK 350 is connected by means of a four-pole terminal strip.