Votre leader canadien en instrumentation depuis 1946.

Setaflash série 8 -Mesure de point d’éclair en vase clos

The Setaflash Series 8 is an automated closed cup flash point tester with a temperature range of ambient +5 to 300°C (ambient +9 to 572°F). The instrument uses an electric hot wire ignitor (gas flame option). There are two modes of flash point operation; Flash/No Flash and Ramp. The ramp mode increases the sample […]

Posez une question sur ce produit

The Setaflash Series 8 is an automated closed cup flash point tester with a temperature range of ambient +5 to 300°C (ambient +9 to 572°F). The instrument uses an electric hot wire ignitor (gas flame option).



There are two modes of flash point operation; Flash/No Flash and Ramp. The ramp mode increases the sample temperature at a rate of 2°C/min, allowing determination of a flash point in accordance with ASTM D7236 and IP 534. The dipping sequence occurs automatically every 1°C up to 100°C (every 2°C rise above 100°C), until either a flash is detected or the end of test temperature is reached. The ignitor uses a new electrical hotwire (a gas flame
 option is available).


 


Features


  • Ambient + 5°C to 300°C (Ambient +9°F to 572°F)
  • Small sample size, 2 or 4ml
  • Flash/No Flash & Ramp modes
  • Electric ignitor (gas available using optional accessory)
  • Automatic dipping and flash detection
  • 64 Test memory & RS232 interface
  • °C or °F temperature display
  • Forced air cooling for rapid test cycling


Methods


 


ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3 & 4, CHIPS Regulations, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids