These abrasives have sharp, hard grains for fast cutting. Use in tumblers, flat laps, sphere machines or wherever coarse and fine grinding grits are needed. The grit sequences below are standard, but can be varied depending on material and need. Standard sequence for rotary tumblers is 60/90, 220 and 600 silicon carbide, followed by a polish. For best results, use an aluminum oxide pre-polish 800 grit before the final polish. Use this same silicon carbide sequence including the aluminum oxide pre-polish, in vibratory tumblers. When lapping, add the 400 and 1000 grits to the standard sequence.

Silicon carbide abrasives are packaged in sturdy containers for convenient storage and use. Prevents leakage and contamination.

• 5-50 lbs (2-20 kg) available
• meets ASTM requirements

G-B14-GENSC 080-50
G-B14-GENSC 128-50
G-B14-GENSC 320-50
G-B14-GENSC 600-50
G-B14-GENSC 800-50