Pressure Bleeding Test Cell – Type A test cell includes cup assembly with funnel and positioning seat for beaker; cover with air inlet fitting; and 200-mesh stainless steel sieve strainer with brass support ring. Bayonet type connection and o-ring seal provide tight closure between cover and base. Cup, funnel and base are constructed of chrome plated spun copper. Order test beaker separately.

Constant Temperature Air Cabinet – Provides a constant temperature environment and regulated air pressure per ASTM specifications. Consists of an insulated airtight cabinet with pressure system to accommodate four pressure bleeding test cells. Equipped with electric heater, solid state controller, cooling coil and circulating fan for efficient temperature control at 77°F (25°C). Pressure system includes air inlet pressure regulator with gauge, cartesian manostat, manifold with control valves for four test cells, output gauge, manostat and gas washing bottle. Built-in pressure relief valve protects against pressure surge. Cabinet is constructed of double-wall stainless steel with full insulation. Order thermometer and pressure test cell separately.

Capacity: four samples

Controller Sensitivity ±1°F (±0.5°C)

Electrical Requirements
115V 50/60Hz, Single Phase, 3A
220-240V 50/60Hz, Single Phase, 1.5A

Dimensions lxwxh,in.(cm)
Interior: 19.75×19.75×21.5 (50x50x55)
Overall: 47*x23.75×31.25 (119x60x79)
*includes external pressure system components
Net Weight: 121 lbs (54.9kg)