Honeywell’s shaft, reaction torque sensors are designed for installation between test pieces, such as motors, switches, axles or shafts and their mounting plates. These models operate and are calibrated in both directions. Each transducer utilizes four bonded strain gauges on a special-machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a […]
Honeywell’s shaft, reaction torque sensors are designed for installation between test pieces, such as motors, switches, axles or shafts and their mounting plates. These models operate and are calibrated in both directions. Each transducer utilizes four bonded strain gauges on a special-machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. They are constructed of either stainless or nickel-plated alloy steel with no moving parts for enhanced durability in harsh, industrial environments. Need something special or a completely customized design? Contact Honeywell to discuss your particular application requirements.
Image | Model | Description | |
|
Model 2120 Low Shaft Reaction Torque Sensor, 50 oz-in to 1,000 oz-in, 0.1 % Non-linearity and Hysteresis | ||
|
Model 2120 Series Shaft Reaction Torque Sensor, 100 lb-in to 500,000 lb-in, 0.1 % Non-linearity and Hysteresis | ||
|
Model QSFK-9 Shaft Type Reaction Torque Transducer, 100 in-lb to 24,000 in-lb, maximum non-linearity of 0.1%, stainless steel |