The RK-1 Rock Sensor package for the KD2 Pro adds increased functionality for measuring hard materials like rock and concrete. Until now good measurements in very hard materials have not been possible. Using the same technology as other KD2 Pro sensors, the RK-1’s larger diameter allows the use of a 5/32nd inch […]
The RK-1 Rock Sensor
package for the KD2 Pro adds increased functionality for measuring hard
materials like rock and concrete. Until now good measurements in very
hard materials have not been possible.
Using the same technology as other KD2 Pro sensors, the RK-1’s
larger diameter allows the use of a 5/32nd inch rotary hammer drill bit
to easily create a properly sized pilot hole. Simply coat the the RK-1
with thermal grease, insert, and measure.
Specifications
Accuracy | ±10% from 0.2 – 6 W/(m·K) ±0.02 W/(m·K) from 0.1 to 0.2 W/(m·K) |
Measurement Speed | 10 minute read time |
Range | 0.10 to 6 W/(m·K) (thermal conductivity) 17° to 1000°C · cm/W (thermal resistivity) |
Size | 3.06 mm diameter x 60 mm long |
Operating Environment of Sensors | -50 to 150°C |
Cable Length | 0.8 m |
KD2 Pro Firmware | KP 1.23.2 or greater |