Model LC digital force indicator, 4 1/2 Digit Display, ±0.7% full scale accuracy, Range of 5 lb to 50,000 lb – Compression only, Stainless Steel Diaphragm Load Cell Design.
The Model LC digital force indicator is a highly portable force measurement device. With its 9 V battery supply and compact size the indicator can easily be carried to remote locations to perform force measurement calibrations. The unit can measure compression forces up to 50,000 lbs.The peak capture feature allows the highest force reading taken to be displayed with the push of a button. The remote location of the load sensor minimizes the chance of damage to the electronic body of the gauge. The stainless steel construction of the sensor and the indicator makes them often resistant to the occasional mishandling than can occur in the field. Optional handles are available for the load cell and gauge. Each unit has a membrane face with raised buttons and tactile feedback for setup and operation. The high, low, and clear buttons are easily accessible on this front membrane. Zero adjustment and zero offset/tare functions are standard on each unit. Calibration and setup parameters are stored on a memory chip to protect from loss even when power is interrupted. Unauthorized set ups and calibrations are also blocked with internal security. Various combinations of the front panel buttons can be de-activated.
Performance Specifications
Repeatability: 0.2 % of full scale
Range: 5 lb to 50000 lb
High and low capture: Standard
Update speed: 3 per sec (selectable to 10 per sec)
Electrical Specifications
Power: 9 V battery, 11 Vdc to 32 Vdc, 100 Vac
Mechanical Specifications
Diameter: 93,98 mm [3.7 in]
Display: 4½ digits
Case material: Stainless steel
Cell materials: Stainless steel
Zero/span adjustment: Standard
Low battery indication: Standard
Face membrane: Tactile feedback
Calibration data: Stored on memory chip
Additional Specifications
| Pressure range (psi) |
Incremental display steps |
| 0 psi to 1 psi (opt) = 1 |
0.001 |
| 0 psi to 5 psi (opt) = 5 |
0.005 |
| 0 psi to 25 psi = 25 |
0.005 |
| 0 psi to 50 psi = 50 |
0.01 |
| 0 psi to 100 psi = 100 |
0.02 |
| 0 psi to 250 psi = 250 |
0.05 |
| 0 psi to 500 psi = 500 |
0.1 |
| 0 psi to 1000 psi = 1K |
0.2 |
| 0 psi to 2000 psi = 2K |
0.5 |
| 0 psi to 3000 psi = 3K |
2 |
| 0 psi to 4000 psi = 4L |
2 |
| 0 psi to 5000 psi = 5K |
1 |
| 0 psi to 7500 psi = 7.5K |
2 |
| 0 psi to 10000 psi = 10K |
2 |
| 0 psi to 15000 psi = 15K |
2 |
| 0 psi to 20000 psi = 20K |
2 |
| 0 psi to 30000 psi = 30K |
Consult factory |
| 0 psi to 50000 psi = 50K |
Consult factory |
Accessories Order Codes
CC2 – Standard carrying case: 3 9/16 D x 7 13/16 W x 8 1/2 L
MR2 – Panel mounting ring
NISTCERTS – NIST certification (in addition to NIST statement)
HD1 – Handle
Hoskin Environnement
Hoskin Géotechnique
Hoskin Instrumentation
Posez une question sur ce produit
