The LIQUI-FLOW™ series L10I/L20I digital Liquid Flow Meters / Controllers for low flow ranges are equipped with a rugged 'industrial style' (IP65) pc-board housing for use in industrial environments. The instruments operate on a thermal, thru-flow measuring principle. The flow meter can be connected to a control valve to form a closed control loop. The standard direct acting valve (model C2I) is normally closed, has a pressure capability of 100 bar (1500 psi) and a purge connection for easy elimination of air or gas.
Lowest range 0,25 … 5 g/h
Highest range 20 … 1000 g/h forfluids with thermal properties similar to H2O
"Multibus" digital communication
Bronkhorst High-Tech developed their digital instruments according to the flexible "multibus" concept, due to which the instruments can be equipped with on-board interface board with DeviceNet™, Profibus-DP®, Modbus or FLOW-BUS protocol.
Features
- Fast and accurate measurement
- No moving parts
- Suitable for liquids with low boiling point
- Attitude insensitive
- Very small internal volume
- In combination with a control valve: continuous and stable control
- Classification IP65
Flow capacities (based on H2O equivalent)
| Liquid Flow Meter |
Ranges |
| Series L13I |
min. 0,25 … 5 g/h
max. 5 … 100 g/h |
| Series L23I |
min. 2 … 100 g/h
max. 20 … 1000 g/h |
| Liquid Flow Controller |
Ranges |
Series L13I + C2I
(IP65 control valve) |
min. 0,25 … 5 g/h
max. 5 … 100 g/h
|
Series L23I + C2I
(IP65 control valve) |
min. 2 … 100 g/h
max. 20 … 1000 g/h |
Hoskin Environnement
Hoskin Géotechnique
Hoskin Instrumentation
Posez une question sur ce produit
