Maximum Flexibility for High-Density Monitoring
The PowerScout 24 is a versatile, multi-channel instrument. The modular design allows it to be configured for monitoring multiple electrical circuits (sharing a common voltage source) or for current-only monitoring of branch circuits. It can be supplied with virtually any combination of DENT’s internally-shunted split-core or RoCoil CTs. Monitor any combination of up to 8 three-phase or 24 single-phase electrical devices with the PowerScout 24.
With data updates every 1 second and ANSI C12.20- 2010 Class 0.5 revenue grade accuracy (depending on CT), the PowerScout 24 is well-suited for data center monitoring, tenant sub-metering, and for accountability metering in commercial, retail, and industrial facilities.
Communications: Industry-Standard Modbus or BACnet
Similar to the PowerScout 3037, the PowerScout 24 allows for communication over either BACnet or Modbus protocol via a serial or Ethernet connection. Ethernet communications are via either BACnet IP or Modbus TCP. Modbus registers and BACnet objects remain the same between Ethernet and Serial PowerScout 24 meters.
Fool-Proof Installation
The PowerScout series instruments are line powered and do not require external power. Its power supply can accommodate service voltages ranging from 80- 600V (phase-to-phase). DENT’s patented PhaseChek™ circuitry includes a 3 LED indicator display that confirms proper CT-to-phase installation.
There are four models to choose from: Serial or Ethernet communications, With or Without an enclosure.
Features
- Available as a bare circuit board or with a convenient rugged enclosure
- Mix-and-match a full range of Split-Core or RoCoil™ Rogowski-style current transformers
- USB Port for Quick & Easy Setup: Simply connect the PS24 to a PC, then use ViewPoint software to configure CT type, communication protocol, and other parameters.
- Choose between Serial or Ethernet interface
- Over 50 measured parameters for energy measurement, monitoring and diagnostics. Monitors voltage, current, power, energy, and many other electrical parameters on single and three-phase systems.
- 24 channels for multi-circuit monitoring
- Standard Pulse Output: 8 digital outputs, one per meter element. Use to send kWh and other pulses to a pulse counting device, such as a data logger
- Standard Pulse Input: 2 digital input ports which are used to count, accumulate, and scale pulses recieved from non-DENT pulse meters such as gas, water, or other electrical meters
- Standard Power Out: 5VDC, 200mA power out to power other devices such as a radio or gateway device
- Single or 3-phase energy and power meter for submetering applications
- Patented PhaseChek™ LED indicators ensure correct CT orientation during installation
- Line-Powered
- Equipped with industry-standard Modbus and BACnet Communications
- Data updates occur every 1 second
- ViewPoint Setup Utility included with meter
- UL Recognized: Bare circuit board
- UL Listed: Circuit board in an enclosure
- CE Mark
Hoskin Environnement
Hoskin Géotechnique
Hoskin Instrumentation
Posez une question sur ce produit
