Monitor sludge blanket height with infrared sensor probes Right out of the box, the Raven Sentry can be up and running quickly with the enclosure mount and probe jib. Lower the sensor probes into the tank and secure at user defined levels. A common setup with a 2 channel model is the "warning" and "alarm" […]
Monitor sludge blanket height with infrared sensor probes
Right out of the box, the Raven Sentry can be up and running quickly with the enclosure mount and probe jib.
Lower the sensor probes into the tank and secure at user defined levels.
A common setup with a 2 channel model is the "warning" and "alarm" configuration. The warning probe is suspended just above the normal sludge level. The alarm probe is suspended above the warning probe at a point where the sludge level is unacceptable.
When the sludge blanket rises to these levels, the Sentry automatically calls or sends a text message to plant staff. The message can be customized depending on whether the warning probe or the alarm probe has been engaged.
It’s simple to customize the Sentry to work in your particular plant.
It all starts at the touchscreen display – much like the ATM that everyone is familiar with.
The Main Screen, as shown below, provides the operator with just four settings.