ICAM, an in situ Integrating Cavity Absorption Meter, is factory configured with nine (9) wavelengths from UV (365nm) to Red (676nm) enabling absorption measurements over a wide spectrum. The patented integrating cavity design means that little or no scattering correction is needed. Built with LEDs and solid-state electronics, the ICAM provides excellent reliability and low […]
ICAM, an in situ Integrating Cavity Absorption Meter, is factory configured with nine (9) wavelengths from UV (365nm) to Red (676nm) enabling absorption measurements over a wide spectrum. The patented integrating cavity design means that little or no scattering correction is needed. Built with LEDs and solid-state electronics, the ICAM provides excellent reliability and low power consumption in a relatively small package. Absorption can be measured from 0.001 m-1 to a maximum of 15 m-1. Data can be collected at a maximum rate of six data lines per second using the ICAM GUI. Alternatively, data can be logged internally and output over RS-232 at a maximum rate of one data line per second. Each data line recorded will have a date/time stamp and may contain up to nine absorption values depending on the wavelengths selected.
Product Highlights: