$190.00
Interfaces with any sensor providing a 4-20 mA signal to connect to HOBO stations compatible with Smart Sensors.
Interfaces with any sensor providing a 4-20 mA signal to connect to HOBO stations compatible with Smart Sensors. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering that improves measurement accuracy with 32 readings/sample and 60 Hz noise rejection.
Highlighted Features
In what environment does this sensor operate?
This sensor operates in an outdoor environment.
What measurements does this sensor support?
The S-CIA-CM14 sensor supports the following measurement: 4-20mA
Measurement range: | 0″‚¬œ10 cm or 0″‚¬œ5 in. per hour; maximum 4000 tips per interval. |
Operating range: | 0° to 50°C (32° to 122°F); survival -40° to 75°C (-40° to +167°). |
Mechanism: | Tipping bucket, stainless steel shaft with brass bearings. |
Resolution: | 0.2 mm (S-RGB) and 0.01 inch (S-RGA) models. |
Calibration: | Requires annual calibration; can be field calibrated by user or returned to factory. |
Measurement range: | 4-20 mA (measures down to 0 mA to detect error condition) |
Operating temperature range: | -40° to 75°C (-40° to 167°F) |
Accuracy: | ±40 µA ±0.3% of reading (over operating temperature range) |
Resolution: | ±4.93 µA. |
Input impedance: | 124 ohms (differential input) |
Sensor trigger source: | Voltage: 2.5 V ±2.4%; maximum current: 1 mA |
Warm-up time: | 300 ms ±3% (fixed) |
Measurement time: | 16.6 ms ±3% to filter out 60 Hz noise |
Cable length: | 14 cm (5.5 inch) |
Copyright - 2025 - Hoskin Scientific