Canada’s Instrumentation Leader Since 1946.

Automated Distillation Tester

The ad-7 automatically performs distillation tests of petroleum products as well as narrow boiling range samples. A 10.4 inch LCD screen with touch panel has been adopted for easy and intuitive operation. The Peltier system is employed for cooling/heating of the condenser and cylinder room. The ad-7 is a CFC free system with a small […]

  • SKU : G-109-AD-7
  • Manufacturer: Tanaka
Ask us about this item
The ad-7 automatically performs distillation tests of petroleum products as well as narrow boiling range samples. A 10.4 inch LCD screen with touch panel has been adopted for easy and intuitive operation. The Peltier system is employed for cooling/heating of the condenser and cylinder room. The ad-7 is a CFC free system with a small footprint.

User-friendly
  • 10.4 inch colour screen is 4 times larger than the previous model
  • Intuitive operation by Touch Panel
  • Advanced data management software; tdas (Tanaka Data Acquisition System)

Versatility

  • up to 200 test modes can be recorded
  • up to 5,000 test results can be stored
  • RS-232C, USB port, Ethernet communication ports

Safety

  • Fire containment system: the heater shuts down when ultraviolet sensor detects a fire and CO2 gas flows into the heater room (if connected to CO2 line).
  • Flask Catcher reduces the risk of breaking vapour tube of flask
  • Overheat protection: heater shuts down automatically at the upper end of the temperature scale.

Standard
JIS K 2254, JIS K 0066, JIS K 5601-2-3, JIS K 2435-1/2/3, ASTM D86-12, ASTM D850, ASTM D1078
Test Ranges
Selectable from 0oC to 300/450oC (fuel oil) or 0oC to 200/450oC (ASTM D850, D1078 with optional accessories)
Program Control
Sequence control by microcomputer
Printer
Built-in, thermal type (Paper width: 80 mm, Print width: 72 mm)
Barometric Correction
Automatic correction by barometric pressure sensor or manual input
Temperature Unit
0.1oC or 0.2oF
Temperature Sensor
For Vapour: Pt100
For Heater: Thermocouple
For Condenser: Pt100
For Receiver room: Pt100
Heater
24 V 600 W Low Mass and Low Voltage Heater, Spiral Type
Heater Cooling System
Forced air cooling by propeller fan
Condenser
Brass tube (standard) or Stainless (option)
Condenser Temperature Control
Electronic cooling and heating by Peltier coolers: 0~69.9oC
Receiver Temperature Control
Electronic cooling and heating by Peltier coolers: 10~50oC
IBP Detection
Photoelectric detection by Infrared LED and phototransistor
Liquid Level Detection
Photoelectric detection by Infrared LED and phototransistor
Distillation rate: 4.5%/min at factory (selectable from 2-9% with 0.5% increment)
Control method: PID control
Dry Point Detection
Manual detection by visual confirmation or automatic detection by Dry Point Sensor (Option, CRC thermocouple)
Power Source
AC100V-240V 50/60 Hz 15A
Size (W x D x H)
430 x 520 x 710 mm
Weight
55 kg

Hoskin Scientific

Whether you require monitoring or testing instrumentation, rentals or service, we are where you need us to be across Canada.

Contact

Departments

Applications

About

Copyright - 2024 - Hoskin Scientific

Back to top