• Ergonomically designed display and switches for high visibility for everybody (universal design) and intuitive operation.
• Enhanced versatility including USB port for optional flash memory or key board, password protection and data storage (200 tests)
• All-in-one chassis design: compact, light-weight and premium exterior design.

Further improved Swing Arm assembly for easy setting and cleaning:
After inserting the test cup in the instrument, just lower the swing arm assembly onto the test cup to set all the necessary components for the test, including the ignition source, temperature sensor, flash detector and stirrer (in case of abl-8 and apm-8). After the test, tilt the arm to the complete upright position for easy cleaning.

Single Action Setting
The cup cover is permanently mounted on a swing-arm assembly, which allows an easy handling of the test cup cover. It makes free from handling the hot cup cover after completing a test.
The swing arm assembly can be lifted up to vertical position for easier test cup cleaning.

Easy Operation
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.

Interchangeable Ignition Source
atg-8w/atg-8l is equipped with both gas and electric igniter as the ignition source. It only takes a few minutes to switch from gas to electric or vice versa.

Draft Protection Shield Cover
A FM4910 conforming cover insures the flame integrity. This material shall meet the numerical criterion of each index. (1)FPI(Fire Propagation Index)≤6 (2)SDI(Smoke Damage Index)≤0.4

Data Handling
The unit is equipped to store up to 200 successive test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.

USB Port
A USB port allows connecting USB keyboard for easy entering sample name and connecting USB flash memory for data copy to a PC or test conditions/parameters copy to the tester.

Compact Design & Energy Efficient
atg-8l uses Peltier Cells for sample cooling/heating. Just a small chiller with water suffices the cooling requirement. No methanol is required.
A control part and a test part are put into one body which culminated in achieved in the light weighting of the unit. A liquid-cooling metal bath model and conventional water bath model are available by different measurement temperature range.

G-109-ATG-8l - Low temperature

G-109-ATG-8w - water bath