Canada’s Instrumentation Leader Since 1946.

Automatic Pendulum Readout TP-2000

The Geosense TP-2000 Series is a readout device specifically designed to automatically measure and record relative movements of normal and inverted pendulums. It is housed in a robust waterproof housing and is simple to install using a special mounting plate.  It can be installed as part of a complete new system or be […]

Ask us about this item

The Geosense TP-2000 Series is a readout device specifically designed to automatically measure and record relative movements of normal and inverted pendulums. It is housed in a robust waterproof housing and is simple to install using a special mounting plate. 


It can be installed as part of a complete new system or be retro-fitted as part of an upgrade to an existing manual system. 


Measurements are obtained using highly sensitive and accurate CCD technology which converts the data with temperature correction into either an analogue or digital signal which can be transmitted to a remote data logger. Data can also be stored and read locally with an additional LED display. 


The Geosense TP-2000 Series is available in three models:

 


Model                      Range


TP-2D-2001            50 x 50mm 


TP-2D-2002            50 x 100mm 


TP-3D-2003            50 x 100 x 50mm















Standard Ranges (X axis) 0 to 50mm; (Y axis) 0 to 50mm, 0 to 100mm; (Z axis) 0 to 50mm
Resolution 0.01mm
Accuracy ± 0.05mm
Repeatability ±0.1mm
Communication Method 4-20mA, RS-485
Display 4-digit LED
Data Storage 2000 data sets, 1200 data sets
Power Supply 85-265 VAC, 50-60 Hz
Operating Temperature -15°C to +60 °C
Operating Humidity 100% relative humidity
Protection IP65