Canada’s Instrumentation Leader Since 1946.

Bridge Based Sensor In-Line Amplifier

Honeywell’s universal in line amplifiers supply a highly regulated bridge excitation voltage for the transducer and convert the millivolt signal of the transducer to either a 0 to 0 to ±5 V, 0 to ±10 V, or 4 mA to 20 mA two or three-wire output. The universal series in-line amplifier features two selectable excitation […]

Ask us about this item
Honeywell’s universal in line amplifiers supply a highly regulated bridge excitation voltage for the transducer and convert the millivolt signal of the transducer to either a 0 to 0 to ±5 V, 0 to ±10 V, or 4 mA to 20 mA two or three-wire output. The universal series in-line amplifier features two selectable excitation voltages, programmable gain settings, a wide adjustment range on the zero, and a buffered solid-state shunt cal relay for quick calibration. Honeywell also offers charge amplifiers for charge-mode piezo-electronic transducers to require charge amplifiers to convert their output to useful levels.
  • Strain gauge sensor or piezo-electric accelerometer amplifiers
  • 8 Vdc to 32 Vdc, 18 Vdc to 32 Vdc, ±15 Vdc or 24 Vdc to 32 Vdc supply voltage
  • ±5, ±10, ±15 Vdc or 4mA to 20 mA two or three wire output
  • Increases signal-to-noise ratio in noisy environments
  • NEMA 4 housing
The Model UV amplifier supplies a highly regulated bridge excitation voltage for the transducer and converts the millivolt signal of the transducer to a ±5 Vdc signal. The Universal In-line features two selectable exciation voltages, programmable gain settings, a wide adjustment range on the zero, and a buffered solid-state shunt cal relay for quick calibration.

Strain gage amplifier; +/- 5 VDC three-wire output

Model:UV

Order Code:BE124

Full Details Here