• Ability to operate on steel cables from 12.7mm to 31.8 mm dia ( 1/2” to 1-1/4” )
• Secures onto cable to prevent accidental detachment
• Traversing speed adjustable from 0.01m/s to 0.60m/s (0.03ft/s to 2.00ft/s)
• Traversing distance measured, with waters edge zeroing
• Ability to raise and lower the ADCP from the water. (Optional)
• Hoist automatically stops when fully raised
• Cable Fox traversing brakes activated when stationary
• Brake is released when Remote Control is switched off – for manual retrieval using attached retrieval cord 
• Automatically returns to the home position if comms is lost for 2 minutes
• Home position is defined as the position where the Cable Fox is turned on
• Measures Cable Fox BattV + Current, Remote Control BattV and signal strength
• All fuses are automatically resettable
• Remote Control beeps when Cable
• Fox battery is less than 10.8V
• When battery is less than 10.5V Cable Fox can ONLY be moved toward home position
• 400m (1312 ft) communication range
• Operates on a single 12V 18Ah battery

Full Details Here