E-8000 Power Supply/Readout and Control

Bronkhorst High-Tech B.V., offer Power Supply / Readout and Control Modules for use with digital Mass Flow Meters / Controllers, Pressure Meters/ Controllers and other transmitters and transducers with RS-232 communication. The E-8000 Series have one or two colour TFT displays per module for indication of measured/totalised values and a push button menu to easily enable the […]

SKU : I-841-E-8000
Manufacturer: Bronkhorst High-Tech

Multi Channel Configurations

Based on the modular technique of the E-8000 series, it is easy to assemble multi channel configurations in ½ 19” and 19” housings, either for rack mount or table top. The exact number of channels to be served with one (½ 19”) or two (19”) power supplies, depends on the type of instruments (meters / controllers) to be connected. For most applications one power supply can serve at least four channels.

Configurations for CEM-system

For Controlled Evaporation Mixing (CEM) systems a single channel module for temperature control can be integrated into a 1-channel cassette and ½ 19” or 19” housings. This module is available with or without display and with various fieldbus options.

Bright, wide angle, 1.8" display (TFT technology)
User friendly operation, menu driven with 4 push buttons
Indication/operation/configuration of
- measured value (direct or %)
- setpoint
- totalised flow
- fluid / tag number
- control characteristics
- fieldbus settings
Programmable alarm functions (min/max, response, counter)
Fluid selection (up to 8 fluids/curves stored in MFM/MFC)

Mechanical specifications

1- or 2-channel table top housing (1 module)
1- or 2-channel cassette for panel mounting (1 module)
½ 19” table top housing (max. 3 modules)
½ 19” rack housing (max. 3 modules)
19” table top housing (max. 6 modules)
19” rack housing (max. 6 modules)
As an option, ½ 19” and 19” housings can be supply with front handles or carrying handles
An overview of the dimensions can be found in the E-8000 brochure

Electrical specifications

Mains voltage 100...240 Vac (50...60 Hz)
Output signal/setpoint signal:
Digital: FLOW-BUS (RS-485) or RS-232
Option for CEM-modules only:
PROFIBUS DP, DeviceNet™, Modbus or EtherCAT^® interface
Subminiature D-connector socket for RS-232 instrument connection
RJ45-connection for connection with FLOW-BUS communication
Power Supply capacity +24 Vdc, 1.25 A (30 W)

Full Details Here