Description

Seed or ground meal is gravity-fed to the press from an integral feed hopper fitted with a manually operated shut-off slide. The thickness of the press cake may be varied. The press is driven at the discharge end through a single-reduction helical gearbox.
The power source is a 4kW, four-pole, three-phase electric motor.Typical throughput data for various seeds is shown in the table below.

Features & Benefits

• Very simple controls
• Robust design
• Self-lubricating shaft in product contact areas
• Removable panels for viewing process and safety
• Quiet processing

Press Capabilities

Requirements

Electrical supply:

FT28-C: 415V / 3ph / 50Hz / 25 amp
FT28-D: 208V / 3ph / 60Hz / 25 amp
FT28-E: 380V / 3ph / 50Hz / 25 amp
FT28-F: 220-240V / 3ph / 60Hz / 25 amp

Technical Specifications

FT28-E version:
Screw press, having barrel constructed from separate cast rings spaced apart by shims. 60mm diameter bore, 155mm drainage length with single-piece wormshaft driven at the discharge end through a single-reductionhelical gearbox.
Complete with feed hopper, manual feed chute, oil discharge chute and suitable base plate. Includes: one 4kW, four-pole motor, 1,450rpm with starter.

• Oil extraction screw press suitable for use in the laboratory
• Complete with feed hopper, manual feed chute and oil discharge
• 4kW electric motor
• Suitable for use with a wide range of seeds or ground meals

Dimensions

Height: 1.09m
Width: 0.99m
Depth: 1.20m