• Surface Water Level, Flow & Quality
• Groundwater Level & Quality
• Offshore X-Linking
• Mining / Geotechnical
• Weather X-Linking & Warning
• Oceanic X-Linking & Warning
• Oil & Gas Production
• Any Low-Power, Remote Data Acquisition System

Features

• Easy-to-use Software includes setup program.
• Terminal strip with screw terminals for I/O and power connections
• Operates 8-16VDC
• TCXO real-time clock with battery backup, typical ±5.4 sec/mo
• Built-in solar panel regulator
• Support for up to 16 measurements of the following inputs:
  • SDI-12/RS485 (not simultaneously)
  • 5 Analog Inputs:
    • 2 single ended inputs (range 0-5V)
    • 2 differential inputs (range ±39mv, ±312mV, ±2.5V)
    • 1 4-20mA input
  • 2 Digital Inputs. Use for tipping bucket, frequency, & on/off
  • Internal temperature
  • Battery voltage
• Options to average or accumulate 1-8 measurements.
• Lightning protection (Gas Tube) on all external inputs.
• User specified equation on any measurement .
• User specified alarm detection on any measurement.
• 2 LED for verification/diagnostics.
• Log capacity: 240K of data accessible via HSPA & direct connect
• Switched Battery Output
• Also operates as a standalone recorder without telemetry
• USB slave for serial connection to PC (USB port does not support typical USB devices like memory sticks, modems, etc.)
• RealTime Clock operates with internal lifetime battery.
• 1 Open collector digital output
• Switched 12 volt output

Advanced Features

• Equation processing & multiple level averaging
• GUI Interface for intuitive programming (See LinkComm)
• Command-line interface for operation without custom programs
• Separate schedules for each measurement
• Upgrade firmware via USB.
• Supports SDI-12, Analog, 4-20ma input
• Switched Power Output w/overload protection & Digital Output
• Gas Tube Protection on Inputs
• Max min or average computations on measurements
• LED operational status feedback
• WiFi access point (IEEE 802.11 b/g) with selectable Auto-Time-Out or Always-On modes

HSPA Telemetry Benefits

• Periodic transmissions at user-set times with data in user-selectable format (pseudobinary B, C, SHEF & ASCII)
• Supports primary/secondary stations via HSPA
• Alarm transmissions as they are detected
• Diagnostics track data amount sent & telemetry performance
• Supports up to 2 outputs (1 digital & 1 switched battery) for remote commands
• Optional message authentication for insuring a trusted source & for messages sent to SutronWIN via HSPA
• Incoming SMS transmissions if HSPA fails or in place of HSPA
• Extremely affordable
• HSPA uses 3.5G cellular technology to provide higher data speeds compared to GPRS

Full Details Here