Canada’s Instrumentation Leader Since 1946.

IQ SensorNet P 700 IQ Orthophosphate Analyzer

The P 700 for orthophosphate measurement can be used as a stand alone analyzer or used with the IQ SensorNet 2020 XT continuous monitoring and control system. Use the P 700 throughout the wastewater plant from pre-sedimentation to biological tanks to the effluent. The P 700 provides continuous data to help operational efficiency improvement decisions […]

  • SKU : E-528-P 700 IQ
  • Manufacturer: YSI
Ask us about this item

The P 700 for orthophosphate measurement can be used as a stand alone analyzer or used with the IQ SensorNet 2020 XT continuous monitoring and control system. Use the P 700 throughout the wastewater plant from pre-sedimentation to biological tanks to the effluent. The P 700 provides continuous data to help operational efficiency improvement decisions and phosphate elimination verification.

  • Compact design - pump for permeate supply is integrated in the analyzer housing
  • Simple system configuration with the IQ SensorNet; measure additional parameters in addition to orthophosphate
  • Low reagent consumption - exchange solutions on average every 4-8 months, reduces overall cost vs. other analyzers
  • Automatic or manual calibration (adjustable)
  • Uses proven Vanadomolybdate (yellow) method of detection
  • Wide measuring range - two measuring ranges allow the P700 to be used in a wide range of locations throughout the WWTP  
  • Indoor or outdoor versions available with heating or cooling
  • 0.45 micron filter complies with Standard Methods
Measurement Method / Channels Vanadomolybdate (yellow)
Measurement Range PO4-P: Range A: 0.05 to 15.00 mg/L; Range B: 1 to 50 mg/L PO4: Range A: 0.15 to 46.00 mg/L; Range B: 3 to 153 mg/L
Operating pH Range 5 to 9
Operating Temperature -20 to 40ºC (-4 to 104°F)
Parameters Measured Orthophosphate
Power 115/230 VAC
Precision PO4P: Range A: 0.05 to 15.00 mg/L; Range B: 1 to 50 mg/L; PO4: Range A: ±2% or ±0.15 mg/L, whichever is greater; Range B: ±2% or ±3 mg/L, whichever is greater
Response Time T-90 < 5 minutes
Storage Temperature -20 to 50ºC (-4 to 122°F)
Unit of Measure mg/L
User Calibratable automatic or manual calibration (adjustable), Yes

E-528-8P-000Y
Indoor version without pump

E-528-8P-001Y
Outdoor version without pump

E-528-8P-010Y
Indoor version with pump

E-528-8P-011Y
Outdoor version with pump