Hoskin EnvironmentalSampling and monitoring instruments for air, water, weather and soil for the environmental, agricultural, mining and research markets.
Hoskin GeotechnicalMaterials and Product testing for soil, asphalt, petroleum, concrete, mining, cement, and research industries.
Hoskin InstrumentationSensors, transducers and instrumentation for industry, manufacturing, research and development and factory automation.
Precision machined stainless steel pressure vessel includes threaded body; lid; stem with filler rod and mounting flange; needle valve for purging, pressurizing and exhausting pressure vessel with oxygen; and burst disk assembly. Pressure vessel interior and inside of stem have a high polish to facilitate cleaning and prevent corrosion. Stainless steel burst disk ruptures at […]
Contact us for details
Precision machined stainless steel pressure vessel includes threaded body; lid; stem with filler rod and mounting flange; needle valve for purging, pressurizing and exhausting pressure vessel with oxygen; and burst disk assembly. Pressure vessel interior and inside of stem have a high polish to facilitate cleaning and prevent corrosion. Stainless steel burst disk ruptures at 223psi (1537kPa) to prevent unsafe pressure build-up inside pressure vessel. Octagonal sections on the pressure vessel and lid permit tight closure with wrench. Includes buna-N gaskets. Can also be used as a pressure vessel in ASTM D5304 “Standard Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure”.
Specifications
Conforms to the specifications of: ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013
| Catalog Number | Product Description |
| G-142-K10500 | Oxidation pressure vessel |
Accessories:
| Catalog Number | Product Description |
| G-142-K10540 | Glass Sample Container and Cover with pour out spout |
| G-142-K10510 | Replacement composition gasket for K10500 Oxidation Pressure Vessel |
| G-142-K10551 | Pressure Line for pressurizing Oxidation Pressure Vessel. 6 ft. (1.83m) long, with quick release coupling for needle valve on pressure vessel and threaded fitting for oxygen tank. |
| G-142-K10556 | Oxygen Manifold Pressure Relief System. Connects to oxygen source to prevent overcharging of vessel. Equipped with relief valve to vent at 125psi and 300 series stainless steel 150psi burst disk assembly. Constructed from 300 series stainless steel. Cleaned for oxygen service. |
| G-142-K10520 | Wrench for tightening seal on Oxidation Pressure Vessel |
| G-142-K10530 | Table Socket installs in benchtop to aid in tightening seal on Oxidation Pressure Vessel |
| G-142-K10560 | Bronze Tubing for connecting pressure recorder to vessel. Flexible seamless helical tubing with protective armor braid and connections. 5 ft (1.52m) long. |
| G-142-K10525 | Burst Disk Assembly retrofit kit for Oxidation Pressure Vessel without burst disk assembly |
Reid Vapor Pressure Cylinders
| Model 1B | No. 1B MGM REID VAPOR PRESSURE CYLINDER (NON PRESSURE TYPE) is to be used for testing samples which can be handled at atmospheric pressures. No. 1B and No. 2B cylinders are to be used according to ASTM Designation: D323, Federal Standard Method 1201, and C.N.G.A. Method. No. 2B Reid Vapor Pressure Cylinder with No. 6 LPG Conversion Adapter is to be used according to ASTM Designation: D1267, C.N.G.A. and N.G.P.A. Methods. (See ASTM Standards on Petroleum Products and Lubricants, Federal Test Method Standard No. 791, and N.G.P.A. Publication 2140.) Material: SS-304 |
| Model 2B | No. 2B MGM REID VAPOR PRESSURE CYLINDER (PRESSURE TYPE) is to be used for testing samples handled at greater than atmospheric pressure. No. 2B MGM REID VAPOR PRESSURE CYLINDER (PRESSURE TYPE), WIT No. 6 MGM LPG CONVERSION ADAPTER inserted between the gauge adapter and the air chamber, is to be used for the determination of vapor pressures of liquefied petroleum gases. No. 1B and No. 2B cylinders are to be used according to ASTM Designation: D323, Federal Standard Method 1201, and C.N.G.A. Method. No. 2B Reid Vapor Pressure Cylinder with No. 6 LPG Conversion Adapter is to be used according to ASTM Designation: D1267, C.N.G.A. and N.G.P.A. Methods. (See ASTM Standards on Petroleum Products and Lubricants, Federal Test Method Standard No. 791, and N.G.P.A. Publication 2140.) Material: SS-304 |
| Model 211A | No. 211A MGM Sample Cylinder Assembly is complete with a No. 19A/SS MGM Needle Valve on each end. No. 211 MGM Sample Cylinder can be furnished with any combination of MGM Needle Valves and Relief Valves in the No.'s 19, 212, 210 and 213 series. Material: SS-316 |
| Model 46C | For conducting the test for copper strip corrosion by liquefied petroleum (LP) gases according to American Society for Testing and Materials Designation: D1838 (ASTM D1838) and the "LPG Corrosion Test (Copper Strip Method)" of the Natural Gas Processors Association. See ASTM Standards on Petroleum Products and Lubricants and N.G.P.A. Publication 2140. Inside the 46C copper strip corrosion test cylinder is a dip tube that extends down approximately 2.5", on which MGM's copper test strip hangs. MGM's LPG corrosion test cylinder is equipped with two of MGM's 1/4" stainless steel neelde valves, model 19A. Materials: Stainless Steel O-Ring: Buna-N |
| Model 9A | This cylinder is to be used to detect the corrosiveness to copper of aviation gasoline, automotive gasoline, farm tractor fuel, cleaners (stoddard) solvent, diesel fuel, fuel oil (distillate), and certain other petroleum products, according to ASTM designation: D130. Each cylinder is subjected to an air pressure test of 120 pounds, followed by a hydrostatic test of 500 pounds. Material: Stainless |
Copyright - 2024 - Hoskin Scientific
