Compression pads are available in several hardnesses.
50 duro for design strength 1500 to 6000 psi.
60 duro for design strength 2500 to 7000 psi.
70 duro for design strength 4000 to 12,000 psi*.

*Qualifying tests must be performed for strength over 7,000 psi per ASTM.

Retainers. Machined, high alloy steel.
Weights. Pads: Net 8 oz. (227 g) ea.
Retainers:
3" (76 mm) Net 4 lbs. (1.8 kg) ea.
4" (102 mm) Net 4 lbs. (1.8 kg) ea.
6" (152 mm) Net 8 lbs. (3.6 kg) ea.

Ordering Information
G-116-HM-182 –  3" (76 mm) Retaining Caps. Set of 2.

G-469-3MP50+2 –  3" (76 mm) Compression Pads. 50 durometer, set of 2.
G-469-3MP60+2 –  3" (76 mm) Compression Pads. 60 durometer, set of 2.
G-469-3MP70+2 –  3" (76 mm) Compression Pads. 70 durometer, set of 2.

G-116-HM-181 – 4" (102 mm) Retaining Caps. Set of 2.

G-469-4MP50+2 –  4" (102 mm) Compression Pads. 50 durometer, set of 2.
G-469-4MP60+2 –  4" (102 mm) Compression Pads. 60 durometer, set of 2.
G-469-4MP70+2 –  4" (102 mm) Compression Pads. 70 durometer, set of 2.

G-116-HM-180 –  6" (152 mm) Retaining Caps. Set of 2.

G-469-6MP50+2 –  6" (152 mm) Compression Pads. 50 durometer, set of 2.
G-469-6MP60+2 –  6" (152 mm) Compression Pads. 60 durometer, set of 2.
G-469-6MP70+2 –  6" (152 mm) Compression Pads. 70 durometer, set of 2.

Special Note:
Capping Pads with Retainers can be used only on compression testers with a vertical daylight opening of 14-1/2" (368 mm) between platens.