Main Applications:

• Determination of water and sediment on mineral oils
• Characterization of mineral oils

Features:

• Heated up to 80ºC.
• 4 /8 places conical, pear, trace and finger tubes.
• tubes positioned in vertical at rest.
• pre-heating program which warms the chamber before centrifugation.
• microprocessor controlled, maintenance free.
• TFT Touch colorful screen, easy use.
• Lid lock system.
• Pre-installation for fitting Gas Exhaust Device.
• Rotor recognition.
• Max. Speed 3.000 RPM/ 2.425 x g.
• Duly isolated, avoid heat lost.
• Accessories designed and produced specially for oily samples.
• Different tubes can be run just replacing the adapters and/or rotors.

Safety Features:

• Gas Exhaust Device
• Chamber in Stainless Steel, guard ring around
• Temperature sensor inside chamber
• Lid dropping protection
• Rotor does not run until the lid is closed, and it cannot be open until the rotor stops
• Safety system against overheating

Rotors and Accessories:

RT 232: 4 x 100ml 6” 3.000 RPM/2.113 x g

Adapters:

• for 4 tubes 6“ conical: RE 461
• for 4 tubes 6“ pear: RE 462
• for 28 tubes 12,5 ml: RE 469

RT 231: 4 x 100ml of 8” 3.000 RPM/2.425 x g.

Adapters:

• for 4 finger tubes: RE 468
• for 16 tubes 12,5 ml: RE 467

RT 243: 4 x 100ml of 8”/ 6” 3.000 RPM/2.425 x g.

Adapters:

• for 8” tubes: RE 479
• for 6” tubes: RE 481
• for 6” pear tubes: RE 480
• for 28 tubes 12,5 ml: RE469

RT 244: 8 x 100 ml of 8”/6” 2.000 RPM/1,069 x g.

Adapters:

• for 8” tubes: RE 482