A precision, processor controlled, block heater bath. Supplied with four test wells and designed to take copper corrosion test tubes. The heater has a temperature range of ambient to 200 °C.

The heater is equipped with a 1 to 999 minute countdown timer with buzzer, a temperature deviation alarm that you can set from 0.5 to 10 °C to able deviation and a delay start stop feature that allows the heater to be turned on or off after a predetermined time interval.

You can calibrate the heater over a wide temperature range.

Features

• Dry heating for up to four test samples
• Accommodates four 25 mm OD test tubes
• Rapid heat up time
• ±0.1 °C accuracy at 150 °C
• Over temperature cut off
• Fault warning Indicator
• Function timer for delayed start / stop (1 min – 72 hours)

Methods