Canada’s Instrumentation Leader Since 1946.

Signal Conditioners for Position Measurement

The MUP110/160 signal conditioner supplies potentiometric sensors with a highly stable constant voltage. A high impedance input circuit presents virtually no load to the wiper signal of a connected potentiometer. The signal is then converted into a proportional current or voltage output. The excellent linearity and low temperature drift ensure full utilization of the outstanding […]

Ask us about this item
The MUP110/160 signal conditioner supplies potentiometric sensors with a highly stable constant voltage. A high impedance input circuit presents virtually no load to the wiper signal of a connected potentiometer. The signal is then converted into a proportional current or voltage output.

The excellent linearity and low temperature drift ensure full utilization of the outstanding benefits of conductive plastic potentiometers, guaranteeing reliable, interference-free transmission of signals for installations with close sensor proximity even over long distances.

The zero point and range can be adjusted independently of each other within wide limits using spindle trimmers. This capability allows standarized output signals to be adjusted even if the maximum range of the sensors is not completely utilized. The electronic circuitry is contained in a polyamide housing designed for snapping on a standard DIN EN 60175 mounting rail. The wide operating voltage range allows the use of a non-stabilized direct voltage power supply. High-grade DC/DC transformers are used in models with electrically isolated supply voltage and signal conditioning.
  • Interface module for position sensors
  • Available with electrical isolation (DC/DC trasformer) as an option
  • Standardized output signals 0 to 10 V 0 tp 20 mA 4 to 20 mA
  • The zero point and range can be adjusted independently