Canada’s Instrumentation Leader Since 1946.

Signal Conditioners for Position Measurement

The MUP080 is an analog signal conditioner specifically designed for linear and rotary potentiometric position sensors. A high impedance input circuit presents virtually no load to the wiper signal of a connected potentiometer. The signal is then converted into a proportional current or voltage output. The electronics are built into an isolated housing. It can […]

Ask us about this item
The MUP080 is an analog signal conditioner specifically designed for linear and rotary potentiometric position sensors.

A high impedance input circuit presents virtually no load to the wiper signal of a connected potentiometer. The signal is then converted into a proportional current or voltage output.

The electronics are built into an isolated housing. It can be snapped directly on DIN rails according to DIN EN 50022.

The wide supply range allows for an unstabilized power supply to be used.

Very good linearity and low temperature drift help maintain the excellent properties of conductive plastic potentiometers. The MUP080 output can be transmitted across long distances with minimum loss of signal and very good noise immunity.
  • Analog signal conditioner for potentiometric linear and rotary sensors
  • High impedance input for potentiometer
  • Basic version with fixed amplification
  • Normalized outputs: 0 to 10 V or 4 to 20 mA
Hoskin Scientific

Whether you require monitoring or testing instrumentation, rentals or service, we are where you need us to be across Canada.

Contact

Departments

Applications

About

Copyright - 2024 - Hoskin Scientific

Back to top