Temperature Controller, Single setpoint

Controller 48x48mm (1/16 Din), single control loop. Basic temperature controller available in one single ordering code. Input selectable for different temperature sensors; one relay or SSR output, programmable as command/alarm/event output. Extended supply range 24….230 Volt ac/dc galvanically isolated. User-friendly operation, programming tools for quick set-up (MEMORY-CARD, programming and monitoring software LABSOFTVIEW). Main features Box: […]

SKU : I-975-ATR236

Ask us about this item

Controller 48x48mm (1/16 Din), single control loop. Basic temperature controller available in one single ordering code.

Input selectable for different temperature sensors; one relay or SSR output, programmable as command/alarm/event output. Extended supply range 24....230 Volt ac/dc galvanically isolated.

User-friendly operation, programming tools for quick set-up (MEMORY-CARD, programming and monitoring software LABSOFTVIEW).

Main features

Box: 48x48 (front panel) x 107 mm

Power supply: 24...230Vac/dc ±15% 50/60 Hz (galvanic insulation)

Consumption: 5,0 VA, 4W

Display: 4 digits 0,4" green + 4 digits 0,3" red

Operating conditions: Temperature 0-45 °C, humidity 35..95 uR%

Material

Box: Noryl UL94V1 self-extinguishing, front panel: PC ABS UL94V0 self-extinguishing

Weight: Approx. 165 g

Sealing: IP65 (Front panel) , IP20 (Box and terminal bloks)

Quick set-up options: Memory Card with / without battery, software LABSOFTVIEW, EASY-UP codes

Inputs

1 Configurable: Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K)

Sampling time: 4,1 ms (frequency 242 Hz)

Outputs

1 Relay: Relay 5 A - 250 Vac resistive charge

1 SSR: 12 Vdc - 30 mA max

Software features

Control algorithms: ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned

Tuning: Manual or automatic

Data protection: Lock of control / alarm setpoint, Access to parameters by password

Alarm modes: Absolute / Threshold, band, high / low deviation. Alarm with optional manual reset

Auto / Man function: Command output percentage

Soft-Start: Rising gradient expressed as Degrees / Hour