Canada’s Instrumentation Leader Since 1946.

Automatic mill and sieve for Soil

Crushing and  sieving of  soil at φ2mm or less can be done at the same time. All the processes can be done without putting out dust at all. – no health hazard or inhaling dust. There is no soil dust generated by the equipment, so the dust collector is unnecessary. Since this equipment is compact […]

  • SKU : DIK-2610
Ask us about this item
  • Crushing and  sieving of  soil at φ2mm or less can be done at the same time.
  • All the processes can be done without putting out dust at all. - no health hazard or inhaling dust.
  • There is no soil dust generated by the equipment, so the dust collector is unnecessary.
  • Since this equipment is compact design, it is possible to set up in a laboratory.
  • Because all the processes are done in an airtight container, the cleaning time is greatly reduced. 
Specification
Outside DimensionsW750×D670×H700mm   (Exclude projyection)
Weight160kg
Operation  time30～120 sec
Adjustable speed10～80 rpm/s
Power supplyAC100V max2.5A
Processing capacityAir dried soil 150g (container) ×4=600g

To raise the crushing efficiency,the crushing rods are made of high density molybdenum. It is covered with polypropylene capsule prevent crushing stones in the soil sample. The sample crushing cotainer (made of the polypropylene) is an assembly type with double layer construction. The dust will not go out outside of the container during the crushing sieving in the device. The soil correction coutainer can be used for sample keeping with lid.

Crushing rod

DIK-2610 Crushing rod

Completely assembled sample container


Soil correction container with lid

DIK-2610 Soil correction container with lid
Hoskin Scientific

Whether you require monitoring or testing instrumentation, rentals or service, we are where you need us to be across Canada.

Contact

Departments

Applications

About

Copyright - 2024 - Hoskin Scientific

Back to top