Canada’s Instrumentation Leader Since 1946.

Geologger G8-Plus

The Geosense® Geologger G8-Plus is built around the easy-to-use G8 control module which has been purpose-designed for geotechnical applications. It offers reliable remote monitoring under demanding geotechnical conditions. The power management system features different power modes, including ultra-low power which enables it to be powered by battery for periods in excess of 12 […]

  • SKU : G-L07
Ask us about this item

The Geosense® Geologger G8-Plus is built around the easy-to-use G8 control module which has been purpose-designed for geotechnical applications. It offers reliable remote monitoring under demanding geotechnical conditions.


The power management system features different power modes, including ultra-low power which enables it to be powered by battery for periods in excess of 12 months.

 

Functions include sensor measurement, time-keeping, data storage, control and alarm notification.

 

The G8-Plus series of data loggers are capable of monitoring all types of sensors including vibrating wire, strain gauge, MEMS (analogue & digital), thermistor, linear potentiometer etc.

  

As monitoring requirements vary widely, final configuration of the datalogger system will depend on the type, number and sampling interval of measurements required. Each Geosense G8-Plus is pre-assembled, pre-tested and the logger module pre-configured prior to delivery.


The factory-set configuration can be easily changed on site by using the keypad to select from a series of menu commands, without the need for any complex programming.

 

Designed to be mounted in the field, the G8-Plus is housed in a robust water-resistant IP66 enclosure to provide maximum protection under the harshest environments.


















Logger Module Supply 110/220Vac, 12Vdc, solar panel
Digital Local Inputs 2 Channels, Trigger / Pulse counter / Frequency
Local Analog Inputs 2 Channels, 4-20mA / 0-3Vdc / 0-10Vdc
Digital Local Outputs 2 Alarm, Relay contact max 24VAC/DC 3A
Communication ports 1 x Ethernet, 2 x RS-485, 2 x RS-232, 1 x Dust Network
Memory 8GB SD card, USB memory-stick
Sampling period preset 1/59min. – 1/23h – 1/10days
Number of stored acquisitions Greater than 2.000.000 in the maximum configuration
Multiplexer Channel numbers 4+4, 8+8, 12+12, 16+16 (or any combination)
Total multiplexers that can be linked Up to 256
Total channels 32 for MUX, max 16,320 channels
Inputs VW, V, mV/V, 4-20mA, Pt100, NTC, RS-485
Resolution 24 Bit V, mV/V, 4-20mA, Pt100, NTC 0.1Hz
Operating temperature -20 to + 70ºC