$790.00
Highly configurable, wireless multiparameter loggers that integrate sensors (purchased separately) for measuring water conductivity/salinity, temperature, level, and dissolved oxygen (coming soon).
A highly configurable solution for monitoring water conductivity/salinity, temperature, level, and more, HOBO MX800 series Bluetooth loggers come in an easy-to-deploy fully submersible model (MX801) and a direct read model (MX802) for convenient data offload without removing the sensor from the water. Save time, money, and your peace of mind with a single platform for monitoring multiple water parameters, featuring interchangeable sensors, easy calibration and setup, and user-replaceable batteries.
Features
Operating Range | -40° to 50°C (-40° to 122°F), cannot be frozen in ice |
Radio Power | 1 mW (0 dBm) |
Transmission Range | Approximately 30.5 m (100 ft) line-of-sight |
Wireless Data Standard | Bluetooth 5 |
Number of sensors that can be connected | 2 |
Maximum Cable Length | 120m (400 ft) |
Logging Rate | 5 second to 18 hours |
Logging Modes | Fixed interval (normal or statistics), burst, or multiple intervals with up to 8 user-defined logging intervals and durations, with pause and repeat options |
Start Modes | Immediate, next interval or date & time |
Stop Modes | Memory full, never stop (overwrite oldest data), date & time, or after a set logging period |
Water Detect | Events are logged when logger is submerged or removed from the water (MX801 only) |
Time Accuracy | ±1 minute per month 0° to 50°C (32° to 122°F) |
Battery | Four AA, 1.5 V lithium batteries, user replaceable |
Battery Life | With W-CTD or W-CT sensors: 2 years, typical with 1-minute logging interval or slower With W-DO sensor: 1-year, typical with 5-minute logging interval or slower Faster logging or statistics sampling intervals, entering burst logging mode, excessive readouts, and remaining connected with the app will impact battery life |
Memory | 730,000 measurements, divided between channels (4 Mbyte memory) |
Data Download Time (with Bluetooth 5+ devices) |
Full memory: Approximately 3.5 minutes 120,000 measurements: 1 minute May take longer the further the device is from the logger |
Dimensions | Logger diameter: 4.14 cm (1.63 inches) Length without sensor: 20 cm (8 inches) Length with W-CTD sensor: 36 cm (14 inches) Length with W-CT sensor: 33 cm (13 inches) Mounting loop: 12.7 x 22.6 mm (0.5 x 0.89 inches) |
Wetted Materials | Logger: PVC housing with polyester film label, PET sensor connector end cap and mounting handle with EPDM and Buna-N O-rings, passivated 316 stainless steel hardware rated for use in saltwater; MX802 also has ePTFE vent Collar: HDPE, titanium screws Note: logger should be mounted so that no metal parts of the logger are in contact with other metals |
Environmental Rating | MX801: IP68; waterproof to 100m (with sensor(s) attached) MX802: IP67, NEMA 6; Weatherproof (with cable or Termination Plug attached); this model is not waterproof |
Copyright - 2024 - Hoskin Scientific